This tower light is equipped with highly visible LED Lights. This unit employs the latest LED technology. This makes it both energy efficient and long-lasting. This Tower Light can be viewed at long distances to inform operators of machine status or instruct operators to perform a predefined task. This LED tower light includes an 85 dB warning buzzer that can be activated as needed.
It can be tilted from 0 to 90 degrees. Typically, this tower light is used for as a CNC machine status light, automated machinery signal device or in stand-alone applications.
The LED Microstack is a flashing or steady burning modular light tower. It is ideally suited for machine-status or process control signaling applications. Consisting of a long life, high-output, and vibration resistant LED lamp cluster, the PRE-F is designed to increase productivity and greatly reduce maintenance costs. The unique prism-cut lens design assures superior light diffusion and greater lens fill. All components, including the LED’s, are warranted for a full 5 years. Pre-wired and pre-assembled, each unit is ready for installation right out of the box. If required, the lenses can be separated without tools by simply twisting and pulling them apart.
Are your projectors and laser lights safe for your eyes?
Yes, our products comply with laser safety standards. No extra protective equipment is needed to use our laser products.
What is the life expectancy of your products?
We pride ourselves in offering you long-term safety solutions utilizing LED technology without the hassle of constantly replacing and maintenance. Each product varies in life expectancy, although you can expect approximately 10,000 to 30,000 hours of operation depending on the product.
At the end of product life, do I need to replace the whole unit?
This will depend on the product you purchase. For example, our LED line projectors will need a new LED chip, while our lasers require a full unit replacement. You can start to notice the approach to the end of life as the projection begins to dim and fade.
What do I need to power the products?
Our line and sign projectors are plug-and-play. Use a 110/240VAC power for use.
Can your products be used in high-temperature environments?
Each of our products features outstanding durability with borosilicate glass and coatings that are designed to withstand extreme heat. You can face the projector's reflective side towards the light source for the best heat resistance.
Are these products safe for industrial spaces?
Yes. Our virtual sign projectors and laser lines feature IP55 fan-cooled units and are built to withstand the harsh conditions of industrial settings.
How should I clean & maintain the lens?
You can gently clean the lens, if required, with a soft microfiber cloth. Dab the cloth in alcohol if necessary to clean any harsh residue off. You can also target compressed air onto the lens to eliminate dust particles.
How should I handle your products?
Always handle our products with care, especially when it concerns installation or movement. The glass lens on our projectors, for example, should be handled with extreme caution, so there is no breakage and no oil from your skin entering the surface.
Do you provide a warranty with your products?
We offer a 12-month warranty with all of our products in addition to service options. Please view our warranty page for further information. An extended warranty is an additional cost.
How fast is delivery?
Shipping time varies on your location and the method of shipping you select. However, we also offer a same-day delivery method (conditions apply) if you place your order before 12pm. You can also contact us to get an estimated delivery time exclusive to you.
