Forklift Red/Green Laser Guide System

Short Description:

 Available in red or green color
 Easy installation with heavy duty magnets
 No height restrictions in operation
 Reduce product losses and improve forklift efficiency
 Rechargeable lithium battery lasts up to 50 hours
 No hardwiring into the forklift!

Product Detail

Product Tags


Make it easier for your forklift drivers to pick and place pallets for a smoother workflow with the Forklift Laser Guide System. This will reduce the time it takes to perform tasks, improving the efficiency of your workplace while preventing accidents and mistakes.


✔ Vibrant Guidelines - the laser lines on this system are very easy to see, making it much easier to place the pallets.
✔ Single & Dual lines - while the dual lasers are used for both the fork and carriage alignment with rack, the single laser aligns with the forks. The dual version helps you avoid any damage during pick and placement.
✔ Choose Your Color - we offer this guide system in both red and green options. Red is a standard, but green is often easier to see in the sunlight (suitable for outdoor situations).
✔ Useful For All - whether the driver is inexperienced or an expert, this guide will make sure you minimize damage and accidents.


Forklift laser Guide system-7
Forklift laser Guide system-4
Forklift laser Guide system-3
Forklift laser Guide system-2


Are your projectors and laser lights safe for your eyes?
Yes, our products comply with laser safety standards. No extra protective equipment is needed to use our laser products.
What is the life expectancy of your products?
We pride ourselves in offering you long-term safety solutions utilizing LED technology without the hassle of constantly replacing and maintenance. Each product varies in life expectancy, although you can expect approximately 10,000 to 30,000 hours of operation depending on the product.
At the end of product life, do I need to replace the whole unit?
This will depend on the product you purchase. For example, our LED line projectors will need a new LED chip, while our lasers require a full unit replacement. You can start to notice the approach to the end of life as the projection begins to dim and fade.
What do I need to power the products?
Our line and sign projectors are plug-and-play. Use a 110/240VAC power for use.
Can your products be used in high-temperature environments?
Each of our products features outstanding durability with borosilicate glass and coatings that are designed to withstand extreme heat. You can face the projector's reflective side towards the light source for the best heat resistance.
Are these products safe for industrial spaces?
Yes. Our virtual sign projectors and laser lines feature IP55 fan-cooled units and are built to withstand the harsh conditions of industrial settings.
How should I clean & maintain the lens?
You can gently clean the lens, if required, with a soft microfiber cloth. Dab the cloth in alcohol if necessary to clean any harsh residue off. You can also target compressed air onto the lens to eliminate dust particles.
How should I handle your products?
Always handle our products with care, especially when it concerns installation or movement. The glass lens on our projectors, for example, should be handled with extreme caution, so there is no breakage and no oil from your skin entering the surface.
Do you provide a warranty with your products?
We offer a 12-month warranty with all of our products in addition to service options. Please view our warranty page for further information. An extended warranty is an additional cost.
How fast is delivery?
Shipping time varies on your location and the method of shipping you select. However, we also offer a same-day delivery method (conditions apply) if you place your order before 12pm. You can also contact us to get an estimated delivery time exclusive to you.

  • Previous:
  • Next:


    Send your message to us:

    Write your message here and send it to us.